Volume 6, Issue 2 (summer 2020)
J Health Res Commun 2020, 6(2): 27-37 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Tabatabaei F S, Asadi-Ghalhari M, Esmaeili R. Modeling and Optimization of Cefixime Removal from Aqueous Solutions by Potato Starch Using Response Surface Methodology (RSM). J Health Res Commun 2020; 6 (2) :27-37
URL: http://jhc.mazums.ac.ir/article-1-471-en.html
URL: http://jhc.mazums.ac.ir/article-1-471-en.html
Assistant Professor, Department of Environmental Health Engineering, Faculty of Health, Qom University of Medical Sciences, Qom, Iran
Abstract: (2027 Views)
Introduction and purpose: Cefixime (CFX) is one of the most extensively used antibiotics across the world. Nonetheless, the entrance of this pharmaceutical compound into water resources has posed a serious problem to the environment. With this background in mind, the present study aimed to analyze the effectiveness of CFX removal from aqueous solutions by potato starch.
Methods: The current study assessed the effect of four main effective parameters, namely pH (3-9), potato starch dose (0-300mg/L), CFX initial concentration (0-16mg/L), and retention time (20-120min), on CFX removal using Response Surface Methodology (RSM).
Results: Under the optimum conditions, the maximum CFX removal efficiency was reported as 65.57%, with the optimum values of pH=4.5, potato starch dose=225mg/L, CFX initial concentration=7.9, and retention time=95min. As demonstrated by the results of RSM, the current study follows the quadratic model (R2=0.987).
Conclusion: Considering the appropriate results of CFX removal by potato starch, it is recommended to be used as a successful method to remove this contaminant from water sources.
Methods: The current study assessed the effect of four main effective parameters, namely pH (3-9), potato starch dose (0-300mg/L), CFX initial concentration (0-16mg/L), and retention time (20-120min), on CFX removal using Response Surface Methodology (RSM).
Results: Under the optimum conditions, the maximum CFX removal efficiency was reported as 65.57%, with the optimum values of pH=4.5, potato starch dose=225mg/L, CFX initial concentration=7.9, and retention time=95min. As demonstrated by the results of RSM, the current study follows the quadratic model (R2=0.987).
Conclusion: Considering the appropriate results of CFX removal by potato starch, it is recommended to be used as a successful method to remove this contaminant from water sources.
Type of Study: Research(Original) |
Subject:
Environmental Health
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
